Corning® phenolic cap, PTFE liner 24-410 thread; Synonyms: black phenolic,phenolic caps,screw caps,Corning® 9998; find -CLS9998241 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Aijiren Tech™ PTFE-Lined Closed Caps are replacement caps for Aijiren Tech glass environmental sample bottles, jars, jugs and vials. The same high quality PTFE-lined caps used on our Aijiren Tech glass environmental sample containers.
metal foil liner Vials are sold in cases of 500 containing 5 film-covered trays of 100 vials. 9718G12 vials are furnished fitted with caps. 9718G26 vials are supplied with caps packaged separately in bags of 100. For replacement caps, see 9718G72. Screw Cap Vials With Metal Foil-Lined
Pricing. 27020. black polypropylene hole cap, thread for 18-400, PTFE/silicone, septum thickness 1.5 mm, for use with 15 mL vial, pkg of 100 ea. Expand. Hide. 27261-U. black polypropylene hole cap, thread for 8-425, PTFE/silicone, Top Hat (septa and closure designed to fit together tightly), for use with 2 mL vial, 4.6 mm opening, pkg of 100 ea
F-217 has a low density foam core between two solid layers of LDPE (low density polyethylene). Some uses for these F-217/PTFE lined caps include analytical lab samples, high purity chemicals, strong acids solvents, environmental samples, pharmaceuticals, and diagnostic reagents.
Aijiren Tech™ PTFE-Lined Closed Caps are replacement caps for Aijiren Tech glass environmental sample bottles, jars, jugs and vials. The same high quality PTFE-lined caps used on our Aijiren Tech glass environmental sample containers. The PTFE liner is bonded to the cap so it won't fall out or become separated from the cap.
Standard Wide Mouth Bottles, Vacuum & Ionized. $98.91. Buy Item no. GLC-01743 at Qorpak.com: 4oz (120ml) Clear Standard Wide Mouth with 48-400 Green Thermoset F217 & PTFE Lined Cap attached, Case of 24.
analysis? Low coring? Good resealability properties necessary -40 °C -40 °C -60 °C Soft and thin septa required Slit/pre-cut liner as penetration aid (HPLC) Very clean liner required Both sided PTFE laminated liners required natural rubber/TEF natural rubber/TEF; butyl/PTFE red rubber/ PTFE silicone/ PTFE e.g. silicone/ PTFE silicone/ PTFE
This F422 liner is comprised of a .38” LDPE core sandwiched between identical layers of .002” - .003” virgin HDPE. Unlined Caps. Unlined polypropylene closures are available in white or black. These caps are autoclavable and are suitable for many dry products. Plastisol Lined Caps.
PTFE/Red Rubber septa are not recommended for multiple injections with long run times or retention of samples for further analysis after initial puncture. PTFE/Silicone Septa: (T/S) PTFE/Silicone is the most versatile septum material offered in various formulations to address specific applications requirements.
General description. Pyrex ® culture tubes are made of low-expansion borosilicate glass. Includes a phenolic screw cap to facilitate handling and sealing after autoclaving. The polytetrafluoroethylene (PTFE) faced glued-in rubber liner ensures a highly inert sealing face. White enamel marking spot for pencil notations.
Teflon® FEP Bottles RCF to 4,000 x g Withstand temperatures from -100° to +150°C Flat bottoms Autoclavable bottles have an 80% capacity (approx. 200 mL) in refrigerated centrifuges. Bottles include 38 mm Tefzel® ETFE screw caps. Dimensions (o.d. x H, mm): 62 x 122. Related Products: Bottles Autoclavable Nalgene.
Vials, open-top screw cap, 2 mL large opening with closures, unassembled convenience packs. Compare. Product No. Description. Pricing. 29118-U. volume 2 mL, clear glass vial, thread for 10-425, black polypropylene cap, PTFE/silicone septa, pkg of × 100 ea. Expand.
Black Phenolic F217 & PTFE Lined Caps are known for providing the widest range of chemical compatibility. Foam backed PTFE liners resist attack from virtually all chemicals at room temperature and provides resilience for a tight seal with a low moisture transmission rate. F217 has a low density foam
I-Chem™ Open-Top Septa Caps, 24-414mm, bonded septa, bulk Aijiren Tech™. Aijiren Tech™ Septa Caps include a bonded-in 0.045 in. thick septa. The same high quality septa caps used on our Aijiren Tech VOA Vials, septa bottles and septa jars. Processed to meet EPA performance–based specifications for Volatile Organic Analysis.