Case
Certified 0.45um hplc filter vials on stock gvs Filter Vial Overview low volume, viscous, particulate-laden or high volatility organic solvent Thomson has a Filter Vial to fit your needs. Key Features.
FV-2045LE - Filter Vial, Low Evap, 0.45um PTFE, 100/pack. $325.00. SKU: FV-2045LE. Overview. Specifications. The Low Evaporation Cap eliminates the pre-slit in the cap membrane allowing the vial to hold sample evaporation to a rate of <.4% over a 24 hour period. This is comparable to standard screw capvials. Filter Vials equipped with the Low
For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives. Larger 0.45, 0.8, 1.2 and 5 µm membrane pore sizes can be used for prefiltration and/or clarification.
All Thomson Filter Vials are the same size as standard LC vials and will fit into any machine or tray available for standard vials. Thomson's filter vial line is a proven indispensable tool for sample prep and analysis for all types of HPLC, GC, LC-MS, GC-MS and lateral flow analyses. Whether testing pharmaceuticals, toxicology or other areas
General Info Technical Resources Request A Sample. Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
The filter membrane is Polyethersulfone (PES) material in 0.22µm or 0.45µm pore sizes for rapid flow rate and low protein binding. Bottle top filters are compatible with 45mm neck bottles. The bottle top filters are sterile (gamma irradiated) and Compare this item 25mm ABLUO™ Syringe Filters GVS Filter Technology
Filters come in a variety of pore sizes. The most common ones used in physical chemistry laboratories are 0.2 um and 0.45um. Generally, 0.45um is sufficient for the majority of procedures. However, where smaller particles may be present in the sample 0.2 um or 0.1 um might be more appropriate. If you need to filter a smaller particle size (for
Recommended for samples containing less than 10% solid particulates. Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers. Minimize sample loss by eliminating multiple transfers. Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon.
Iso9001 0.45 micron hplc syringe filter Restek-Chromatography Syringe Filters Solvent Compatibility Chart 1 Protect any analytical system. 2 Extend LC column lifetime. 3 Achieve more reproducible analyses. 4 Variety of membranes, porosities, and diameters available. 5 Luer lock inlet provides strong, leak-tight syringe connection to withstand
As well as being suitable for the filtration of organic solvents in applications such as HPLC and UHPLC sample preparation, the hydrophobic nature of the PTFE membrane makes these syringe filters ideal to use in gas filtration or as a moisture barrier in venting applications. 25 mm Standard Acrodisc Syringe Filters.
Fast and cost-effective filtering process The Separa® Toggler 120 is a maintenance-free unit without replacement parts Characteristics Dimensions Separa® Filter Vial 12mm diameter x 32mm height Materials Separa® Filter Vial Polypropylene, PTFE and silicone Chamber Volume 480µl Filter Capacity 450µl Compression Force 0.6bar
GVS Bottle-top Filters is ideal solution for the filtration of cell culture media and HPLC media solution. ZapCap™ filters are equipped with side tubing nozzle (bottle-top). This ready to use filter is available with prefilter too. Characteristics Membrane diameter 76mm Effective area of filtration 39.2cm² Temperature Can be used up to 50°C
GVS Filter Technology offers a full line of laboratory filtration and analysis products, providing an incomparable experience for the customer in the analytical, chemistry and life science laboratories. GVS Group is a global supplier of membrane-based solutions for life science research. We offer a full line of research tools for
Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of samples improves the quality and consistency of analytical results and decreases
Microbiological Monitor: The membrane is fixed to the unit. Single use, pre-sterilized filtering units with welded fixed membranes and culturing devices 47 mm or 56 mm Nitrocellulose Membrane, sterile, for faster flow rates. With no need for flaming or sterilization, GVS monitors cut multiple steps out of the testing process, saving your lab up