Case
Thomson Standard Filter Vials can be used for samples containing less than 10% solid particulates. The filter vial consists of two parts: a filter vial shell and a plunger which includes a single layer filter on one end and a vial cap on the other end.
Thomson Filter Vials are manufactured without the use of plasticizers or mold release agents, making them LC/MS clean. Testing with ELSD, PDA, and MS detection by Takeda Pharmaceutical showed no leaching from Thomson Standard Filter Vial with a 0.45um, PTFE membrane compared to signifi cant leaching from Millipore Millex-FH®
Thomson SINGLE StEP Nano Filter Vials. Ultra-low dead volume allows you to filter as little as 10 μL of sample and still obtain enough filtrate to make a 2 μL injection. Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers.
PES (polyethersulfone) Porosity. 0.2 µm. Units. 100-pk. Product Name. Thomson SINGLE StEP Nano Filter Vials. 22 Acylcarnitines and 13 Amino acids (Endogenous) in Dried Blood Spots with 16 Deuterated Internal Standards on Raptor HILIC-Si EXP Guard Cartridge Column by LC-MS/MS.
Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
Filter Vial Overview - Thomson. Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
Shimadzu Part Number:REST-26399 Membrane Filters Nylon, 47mm, 0.22um, 100pk E-mail this product to a friend Membrane Filters Product Name: Nylon Membrane Filters, 47 mm, 0.22 µm Product Type: HPLC Accessory Similar to: Grace 2034, 2106718 Units: 100-pk. Price: $147.00 Special order Quantity:
Patented Thomson SINGLE StEP® filter vials speed up sample preparation and analysis. The incorporated vial plunger contains an integrated mem-brane that filters samples with just one squeeze—a SINGLE StEP® process to minimize sample loss while saving time and money. SINGLE StEP® vials are less cumbersome and safer to use than conven-
Filter Vials are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
Thomson Filter Vials No multiple step transfers needed. Pre-slit caps for all our filter vials for sale, with the exception of the low evaporation caps, ensure a no-hassle, clean aliquot withdrawal. No more breakage of expensive needles or coring problems on the HPLC or Mass Spectrometer.
Mix the solution and filter using filter paper; discarding the first 10 mL filtered. Label two test tubes and pipette 5 mL of the filtrate over 5 mL of distilled water in the first
thomson 0.22um hplc filter vials for sale Vials For Hplc at Thomas Scientific Vials Autosampler HPLC 2.0mL, 12x32mm, 11mm Crimp. Chemglass. allows for the use of the patented Poly Crimp™ Seals or standard aluminum seals.
Whatman Cyclopore track-etched membrane filter circles are suitable for a wide variety of applications, from general filtration, including cross-flow filtration (tangential flow filtration), to air and water monitoring, microorganism analysis, and many healthcare applications, including immunodiagnostics.
Polytetrafluoroethylene PTFE Hydrophilic Syringe Filters, 0.22um, 25mm, Luer-Lok/Luer Slip, Sterile, 100 per pack, SF18238 Regular Price $149.44 Price $129.95 Add to Cart
Color-coded caps allow easy identification of 0.2 or 0.45 μm membranes in PVDF, PTFE, PES, or Nylon. Fit most standard 12×32 mm autosamplers. Standard|Filter Vials are designed to speed up sample prep and minimize transfer steps. Available in a variety of membranes and pore sizes. Simply add sample and diluent, press, and it is ready for